NRC Auction

Auction Information
Thomas Blackmon
APRIL 24 @ 8AM
Auction Notes
16 th Annual NRC Railroad Equipment Auction
Auction Site: Blackmon Auctions, 425 Blackmon Road, Lonoke, Arkansas 72086
Date/Time: Wednesday, April 24 – starts at 8:00am and will finish around 1:00pm
Equipment Inspection: 8:00am – 5:00pm, Tuesday, April 23 officially, but practically speaking anytime in the weeks preceding the auction.
Shipment & Delivery of Equipment: To schedule shipment or delivery of equipment for the auction, please contact Thomas Blackmon of Blackmon Auctions at 501-352-4702 or thomas@blackmonauctions.com.
Hotel: Courtyard by Marriott Little Rock Downtown (521 President Clinton Ave, Little Rock, AR 72201). The discounted room block rate of $109/per night (before taxes) will be available until April 10th. Please click here to book your room at the discounted room block rate.
Happy Hour/Social Event: A happy hour event will be held from 5-11PM on the evening of April 23rd at the lobby bar of the Courtyard by Marriott Little Rock Downtown. Everyone who is attending the auction is welcome at the happy hour. We hold this happy hour every year the night before the auction, and it is always a good time and a good opportunity to talk about the equipment available the following day. Plus, drinks are on us!
Airport: Bill and Hillary Clinton National Airport (8 minutes from Courtyard by Marriott Little Rock Downtown)
The initial list includes TKO tie inserters/removers, Kershaw tie cranes, a Mark IV tamper, spikers, TR10s, Gradall earth movers, Pettibone material handlers, rotary scarifiers, pickup trucks, hi-rail welding trucks, and backhoes. Equipment that has been available for purchase
at past auctions includes adzers/cribbers, air compressors, backhoes, ballast regulators and compactors, clip applicators and removers, cranes, excavators and gradalls, hi-rail trucks, Mark I, II and III Tampers, rail heaters, rail manipulators, rail saws, rotary scarifiers, speed
swings, spike drivers and pullers, tie handlers, tie removers/inserters, track liners, and track undercutters.
Ballast Regulators
Kershaw 26-2 ballast regulator
Kershaw 26-2 ballast regulator, S# 26-1184-77, Detroit diesel, recently on job and runs good
1988 Kershaw 46-1 ballast regulator
1988 Kershaw 46-1 ballast regulator, S# 46-234-88
1991 Kershaw 46-2 ballast regulator
1991 Kershaw 46-2 ballast regulator, S# 46-294-91
Anchor Squeezer
2002 HTT
2002 HTT, S# 6300612
Tie Drill
HTT W132 tie drill
HTT W132 tie drill, S# 257370
Spikers
2008 Nordco CX-UG Hammer
2008 Nordco CX-UG Hammer, S# 41036388-UG
Harsco W96 spike driver
Harsco W96 spike driver, S# ?, engine runs strong but has been sitting for a while
Harsco W96 spike driver
Harsco W96 spike driver, S# 257555, on job in mid 2018
Spike Pullers
2008 Norcco SP2R-A
2008 Norcco SP2R-A, S# 310126, enclosed cab, John Deere diesel
2006 Nordco M-3
2006 Nordco M-3 B ride on spike puller
Fairmont Tamper W113F
Fairmont Tamper W113F, S# 257390, John Deere diesel
Nordco Super Claw LS-HC
Nordco Super Claw LS-HC, S# 350184-RB-UG
2001 HTT W113E1
2001 HTT W113E1, S# 257581
Fairmont W113
Fairmont W113, single side
Nordco RH
Nordco RH spike puller, S# 266
Tie Cranes
Kershaw 12-5-UP
Kershaw 12-5-UP, S# 12-1000-99, John Deere diesel
Kershaw 12-12
Kershaw 12-12, S# 12-1314-09, Cummins diesel
Evans 2170
Evans 2170, S# n/a
Jackson 950 tie crane
Jackson 950 tie crane, S# 152617
Tie Remover Inserters
Fairmont Tamper RMC305 model B
Fairmont Tamper RMC305 model B, S# 256570
1992 Fairmont TR-10 Tie Inserter
1992 Fairmont TR-10 Tie Inserter, SN: 5591402
1998 HTT Super TKO
1998 HTT Super TKO, S# 257364
Ballast Vibrator
Canron Tamper CSC-2
Canron Tamper CSC-2, S# 4481696
Fire and Water Carts
K&G Manufacturing FC4101 cart
K&G Manufacturing FC4101 cart, S# FC003-303, hose reel and tank
(2) Budde Ent. BE-FC-225 carts
(2) Budde Ent. BE-FC-225 carts, 2 hose reels and 225gallon tank
Clipper
Racine S-Clipper dual workhead clipper
Racine S-Clipper dual workhead clipper, S# 168-06, John Deere diesel
Kershaw 8-2 dual clip applicator
Kershaw 8-2 dual clip applicator
2010 Cembree PCM-2P CAA E-Clip machine
2010 Cembree PCM-2P CAA E-Clip machine, walk behind
Rough Terrain Cranes
Galion 150A crane
Galion 150A crane, S# n/a, 30k lb capacity, 360 rotation, 3 stage boom, Detroit diesel
Speed Swings
John Deere 644G speed swing
John Deere 644G speed swing, S# DW544GD552187, Mountain Manufacturing speed swing conversion S#4471075, hyrail, enclosed ROPS, very good unit
2001 Pettibone 445E Speedswing
2001 Pettibone 445E Speedswing, SN: 3195
Swingmaster 441-B
Swingmaster 441-B, S# 1-2142, hyrail, enclosed cab, Detroit diesel, 4wd, 4ws, stinger boom
Pettibone 441-B
Pettibone 441-B, S# n/a, hyrail, no stinger, Detroit diesel
Pettibone 441B
Pettibone 441B, S# 2203, bucket, 4ws, 4wd
2002 Pettibone 445E Speedswing
2002 Pettibone 445E Speedswing, SN: 3201
Pettibone 360
Pettibone 360, S# 2914, enclosed ROPS, hyrail, no stinger, Detroit diesel
Pettibone 441-B
Pettibone 441-B, S# 2667, hyrail, enclosed cab, Detroit diesel, stinger boom, 4wd, 4ws
Pettibone 445-D
Pettibone 445-D, S# 2997, no stinger, Detroit diesel
Spike Reclaimers
Harsco Plate Plucker
Harsco Plate Plucker, S# n/a
Brooms
1984 Canron DB-505 Double Broom Regulator
1984 Canron DB-505 Double Broom Regulator, SN: 1786554
Flatbed Trucks
2006 International 4400 flatbed truck
2006 International 4400 flatbed truck, S# 1HTMKAAN27H517620, DT466E engine, hyrail, automatic, 27910 miles
Pickup and Service Trucks
2011 Ford F350 Hyrail Truck
2011 Ford F350 Hyrail Truck, Ext Cab, 4×4, Diesel, 8′ Knapheide Service Body, SN: 1FT8X3DT1BEC88167
2008 Chevrolet 3500 Hyrail Truck
2008 Chevrolet 3500 Hyrail Truck, Crew Cab, 4×4, Diesel, LWB, SN: 1GCHK33618F133910
Rotary Dumps
1999, Volvo WG64 Hyrail Rotary Dump
1999, Volvo WG64 Hyrail Rotary Dump, DMF 14′ Dump, RW1630 Rail Gear, SN: 4VHJCCPF6XN865983
Welding Trucks
2002 GMC C-7H042 Hyrail Welding Van
2002 GMC C-7H042 Hyrail Welding Van, 25,950 GVWR, 16′ Van Body, Liftgate, SN: 1GDK7H1CX2J507766
2001 Ford F-750 Hyrail Welding Van
2001 Ford F-750 Hyrail Welding Van, 25,900 GVWR, 16′ Van Body, Liftgate, SN: 3FDXF75B71MA74770
Grapple Trucks
2007 Sterling LT9500 Hyrail Material Handler
2007 Sterling LT9500 Hyrail Material Handler, 20K FA, 46K RA, T/A, Northshore 80 Boom, Remote Drive, 22′ Platform Body, SN: 2FZHAZDE17AY332362003 Sterling LT9500 Hyrail Material Handler, 58,000 GVWR, T/A, Northshore 80 Boom, Remote Drive, 22′ Platform Body, RW1630 Rail Gear, SN: 2FZHAZAS63AK69118
Crane Trucks
1995 Ford L8000 Hyrail Boom Truck
1995 Ford L8000 Hyrail Boom Truck, 18K FA, 40K RA, 346 National Crane, 8 Ton, 18′ Platform Body, RW1630 Rail Gear, SN: 1FDZY82E3SVA76059
Brandt Trucks
2002 Western Star 4900 Brandt truck
2002 Western Star 4900 Brandt truck, S# 2WLMALAV92KJ53551, Caterpillar C15 engine, automatic trans, Brandt 3028 loader, 36” magnet, Van Air hydraulic air compressor, rail car coupler, train air, continuous PTO, 57k miles +/-
1995 Western Star 4900 Brandt truck
1995 Western Star 4900 Brandt truck, S# 2WLPCCCJ15K935909, Caterpillar C15 engine, automatic trans, Brandt 3028 loader, magnet, Van Air hydraulic air compressor, rail car coupler, train air, continuous PTO, 59k miles +/-
Miscellaneous
(12) cases of Encore Tie Plugging Compound
(12) cases of Encore Tie Plugging Compound with 2 applicators (all proceeds from these will be donated to the NRC safety fund)
Racine Single Safelock applicator
Racine Single Safelock applicator
Geismar TM2000 vertical bolter
Geismar TM2000 vertical bolter
Kato Generator
Kato Generator with pump countershafts
MK3 and MK4 cylinders
MK3 and MK4 cylinders
(2) Pallets of Harsco tamping tools
(2) Pallets of Harsco tamping tools
(2) Pallets of Jackson tamping tools
(2) Pallets of Jackson tamping tools
(2) Pallets of MK3 and MK4 workhead tops
(2) Pallets of MK3 and MK4 workhead tops
(2) Pallets of MK3 side arms
(2) Pallets of MK3 side arms
(2) Jupiter 1 output modules
(2) Jupiter 1 output modules
Backhoe Loaders
Case 580SK
Case 580SK, S# n/a, 4×4, enclosed cab, extenda hoe
Ballast Car
QTE 13TRX
QTE 13TRX Ballast Car, S# BC-90099
New and Rebuilt Pandrol Tools
(8) New Matweld 02500 10gpm 1” impact wrench
(8) New Matweld 02500 10gpm 1” impact wrench
(2) Rosenqvist Roller Grip Rail Threader
(2) Rosenqvist Roller Grip Rail Threader
ESCO weld demolder
ESCO weld demolder
Matweld straight stone grinder
Matweld straight stone grinder
(2) Matweld stand up handle for 01600 impact
(2) Matweld stand up handle for 01600 impact
Matweld index bar 3-1/26x6
Matweld index bar 3-1/26×6
Pressure test gauge
Pressure test gauge
Matweld surface grinder
Matweld surface grinder
New Matweld 03900A reversing rail saw
New Matweld 03900A reversing rail saw
Hannay 12v electric hose reel with hose
Hannay 12v electric hose reel with hose
Matweld bull nose grinder
Matweld bull nose grinder
(2) Matweld 1/2” impact drill/wrench
(2) Matweld 1/2” impact drill/wrench
Matweld chamfer tool with bit
Matweld chamfer tool with bit
(2) Esco insulated joint sling
(2) Esco insulated joint sling
Matweld 6” cup stone grinder with trigger
Matweld 6” cup stone grinder with trigger
Pressure gauge with load cell
Pressure gauge with load cell
Absentee Items
Note: These items will be sold absentee during the live auction. Buyer will be responsible for pick up. For more information on inspection or equipment condition please contact Thomas Blackmon at thomas@blackmonauctions.com
2008 Freightliner S2 rail inspection truck
2008 Freightliner S2 rail inspection truck, S# 4UZACRDJX8CZ05970, mileage unknown, truck #25, located in Arkola, IL
2007 Freightliner FS65 rail inspection truck
2007 Freightliner FS65 rail inspection truck, S# 4UZAAXCS87CX30170, 306,000 miles, truck #22, located in Beacon Falls, CT
2007 Freightliner FS65 rail inspection truck
2007 Freightliner FS65 rail inspection truck, S# 4UZAAXCS87CX30171, 241,700 miles, truck #20, located in Arcola, IL
2007 Freightliner FS65 rail inspection truck
2007 Freightliner FS65 rail inspection truck, S# 4UZAAXCS97CX30162, mileage unknown, truck #20, located in Beacon Falls, CT
2007 Freightliner FS65 rail inspection truck
2007 Freightliner FS65 rail inspection truck, S# 4UZAAXCS87CX30171, 193,400 miles, truck #23, located in Beacon Falls, CT
Columbia, South Carolina Items
Note: the following items are all in Columbia, South Carolina. The crane loading will be included in the price. The Ballast Regulators will be loaded on May 2nd and all other items on May 3rd.
2002 HTT Super Broom
2002 HTT Super Broom, S# 6300632
1998 HTT C154ES Chase Tamper
1998 HTT C154ES Chase Tamper, S# RM9ES01177
1997 HTT C154BR Ballast Regulator
1997 HTT C154BR Ballast Regulator, S# 9BR01137
1997 HTT C154BR Ballast Regulator
1997 HTT C154BR Ballast Regulator, S# 9BR01217
2002 HTT Super Broom
2002 HTT Super Broom, S# 6300652
1998 HTT C154ES Chase Tamper
1998 HTT C154ES Chase Tamper, S# RM9ES01228
1997 HTT C154BR Ballast Regulator
1997 HTT C154BR Ballast Regulator, S# 9BR01147
1995 HTT C154BR Ballast Regulator
1995 HTT C154BR Ballast Regulator, S# 9BR01075

LOCATIONS
Arkansas Auction Complex
425 Blackmon Rd
Lonoke, AR 72086
FAX 501-676-0218
Oklahoma Auction Complex
2801 South 32nd St
Muskogee, OK 74401
Texas Auction Complex
7121 Texas 171
Godley, TX 76044